About this archived opportunity

the Government PCO to arrange for testing and, if approved, added to the OD as an approved source of supply for subsequent procurements. ON DRAWING 2314354P1 (10001) REV 3 NOTE DETAILS AS FOLLOWS: 1.INTERPRET DWG IN ACCORDANCE WITH THE STANDARD SPECIFIED IN MIL-D-70327 AND OD 15292 2. UNIT SHALL WITHSTAND SALT SPRAY TEST PER MIL-STD-202, METHOD 101 3. UNIT SHALL INCORPORATE A SPRING-LOADED TRIGGER MECHANISIM SO THAT PROVIDING AND ADJUSTABLE FORCE OF 25LB TO 45LB ON HANDLE WILL ACTUATE TRIGGER AND APPLY GENERATED HAMMER BLOW TO THE THREADED TIP. 4. UNIT, ,WHEN ASSEMBLED TO TIPS, BUORD DWG 2314355, 2314358, 2314259, 2314360 SHALL PERMIT INSERTION OR REMOVAL OF CONTACTS PER OS 12614 WITHOUT DETRACTING FROM THEIR ABILITY TO MEET REG OF OS 12614. 5. MARK 2314354, REVISION LETTER TO WHICH PART IS MANUFACTURED AND MANUFACTURE'S SYMBOL PER MIL-STD-130. MEASUREMENTS: TOOL (TOP LEFT, FROM TOP TO BOTTOM) 4.812 MAX IN EXTENDED POS 4.500 MAX IN COMPRESSED POS .500 MIN | DIAMOND KNURL | .406/.343 | .750 MAX DETAIL A: CSK 120 DEG / 80 DEG X .17 / .20 DIA & C'BORE TO CLEAR .157-40 THD X .187 APPROX DP & .157/.154 - 40NS 2B, P.D. .1365/.1382, .250 APPROX FULL THREAD \