About this archived opportunity

Contractor shall provide all labor, material, and equipment necessary to clean, disassemble/reassemble, and inspect all lifting machinery for the Barkley Lock Emergency Lift Gate, including but not limited to the limit switch assemblies, motors, enclosed gears, open gears, gear mounting assemblies, drums, sheaves, wire rope, brakes, shaft bearings, couplings, and control equipment. Provide the initial inspection reports with pictures of the equipment that show any deficiencies found during the inspection. Provide touch-up painting for all exterior surfaces of items in the scope of work after inspection except as otherwise noted. If a contract option is exercised, paint the respective components (except as otherwise noted) after the work in the contract option is completed. After completion, provide as-built reports that show as-built fits, backlashes, contact patterns and end floats. Initial inspection reports and as-built reports shall be required for all open gears, limit switch assemblies, and enclosed gears. Mark-up of the PDF for as-builts are acceptable. No CAD drawings shall be required for the as-builts. Provide new oil, grease, filters, fasteners, keys, and others as needed to get the Emergency Gate (E-Gate) machinery ready for operation.

Related opportunities

• Repair, Service, Inspection, and Restoration of Fire Apparatus Unit 822DEPT OF DEFENSE
• Repair, Refurbishment, and Engine Replacement Services Ladder 831 – 2010 Pierce Velocity Fire ApparatusDEPT OF DEFENSE
• C.J. Brown Elevator Market SurveyDEPT OF DEFENSE
• 2 Post 10,000LB LiftDEPT OF DEFENSE·Closes in 4 days
• Sources Sought for DVR Autoclave Preventive Maintenance and Repair ServicesHEALTH AND HUMAN SERVICES, DEPARTMENT OF