Vacuum Chamber Slit and Hardware
ENERGY, DEPARTMENT OF
Place of performance: Lemont, IL
Free. Verify your email, then we send one reminder only.
- Posted
- Aug 20, 2026
- Closes
- Aug 24, 2026 (in 4 days)
At a glance
This is a government contract opportunity posted by ENERGY, DEPARTMENT OF in the analytical laboratory instrument manufacturing category. The deadline is August 24, 2026, 5 days from now. Work is performed in Lemont, IL.
Classification and identifiers
- Industry (NAICS)
- Analytical Laboratory Instrument Manufacturing (334516)
- Product or service (PSC)
- Laboratory Equipment and Supplies (6640)
- Solicitation number
- 6-B139-Q-00410-00
- Contracting office
- ARGONNE NATL LAB - DOE CONTRACTOR
Who can apply
About this opportunity
Looking for a domestic source. This means that the country of origin is USA. Not just manufacturing but also raw materials must be from the USA. Vacuum Chamber Slit - 1 Each - Technical Specs below Cables between customers feedthrough and controller (10 meters) Technical Specifications Aperture size: Maximum: 7 mm x 7 mm; Minimum: Full overlap. Resolution: Aperture: 0.813 microns per full step; Translation: 0.322 microns per full step. Repeatability: < 1 micron. Accuracy: ± 3 microns (over 3 mm). VacuumO-ring sealed, high vacuum 10-5 mbar, low outgassing materials. Standard blades:2 mm thick tungsten carbide blades with a 2 degrees knife-edge profile. Limit switches (end-of-travel) Included as standard on all motions. Guiding: High precision internal rails and carriages. Electrical connect...