USCG Station Rockland Window sealant
HOMELAND SECURITY, DEPARTMENT OF
Place of performance: Rockland, ME
Free. Verify your email, then we send one reminder only.
- Posted
- Aug 29, 2026
- Closes
- Sep 1, 2026 (in 3 days)
Similar opportunities open now
- USCG Sector Field Office Southwest Harbor - Major Maintenance and Repair Galley and HousingSame funderOpenHOMELAND SECURITY, DEPARTMENT OFCloses in 19 days
- DOCKSIDE: USCGC ALERT DS1 FY27Same funderOpenHOMELAND SECURITY, DEPARTMENT OFNo deadline listed
- USCGC ISAAC MAYO FRC REPLACEMENT AWNINGSame funderOpenHOMELAND SECURITY, DEPARTMENT OFNo deadline listed
- Annual Inspection, Testing and Limited Maintenance of all Installed Fire Alarm and Detection Systems, Water Based Fire Protection Systems, Dry Chemical Extinguishing Systems, Wet Chemical Extinguishing Systems and Fire PumpSame funderOpenHOMELAND SECURITY, DEPARTMENT OFNo deadline listed
- USCG Station Cape Charles Sewage Lift Station RepairsSame funderOpenHOMELAND SECURITY, DEPARTMENT OFCloses in 3 days
At a glance
This is a government contract opportunity posted by HOMELAND SECURITY, DEPARTMENT OF in the other building equipment contractors category. The deadline is September 1, 2026, 3 days from now. Work is performed in Rockland, ME.
Classification and identifiers
- Industry (NAICS)
- Other Building Equipment Contractors (238290)
- Product or service (PSC)
- Repair or Alteration of Office Buildings (Z2AA)
- Solicitation number
- 37000PR260000068Rocklandwindaows
- Contracting office
- BASE BOSTON(00024)
Who can apply
About this opportunity
Inspect all windows/awnings and surrounding for drafts, leaks, or visible damage and submit a report to the CG. The pre report will include using a water wand to verify where the water intrusion is coming from. After, the contractor will remove any old, cracked sealant and clean the surfaces thoroughly. Apply new, high quality, weather resistant, sealant around the entire window frame, ensuring a continuous and smooth bead. Check and adjust the window sashes, jambs, sill, flashing and locks to ensure a tight seal. Also, apply new, high quality, weather resistant, sealant around the awning to make sure no water intrusion occurs without taking the awning off. Reinstall or replace any worn weather stripping. Finally, conduct a post inspection insuring no leaks remain (water wand), confirming ...